Non-Handed, Surface and Semi-Mortise
Smoother action positive seal mechanism. All Pemko automatic door bottoms consist of an aluminum case which surrounds a movable drop-bar seal. The drop-bar seal is actuated by a plunger which contacts the jamb as the door is closing, forcing the drop-bar seal down against the floor / threshold.
All models (except #420) include seals which are offered in two materials: soft closed cell sponge neoprene (R) which remains pliable down to -70°F and PemkoPrene thermo-plastic elastomer (PK).
Especially over uneven surfaces, both PemkoPrene (PK) and nylon brush (NB) provide excellent seals to keep out draft, dust, moisture, insects, fumes, light, and sound.
All models (except #430 and #412) are non-handed and reversible. Installation is fast and easy because disassembly is not required to change handing: simply flip the automatic door bottom and you’ve reversed the hand. The clean symmetrical square-shaped case design also provides for even flush mounting.
The line includes models which can be mounted to either wood or hollow metal doors.
End plates are provided for all mounting applications.
All Pemko automatic door bottoms seal up to a 3/4" gap under the door except 420 and residential models which seal 1/2” maximum.
Available in any size ranging from 18" to 48".
All Pemko automatic door bottoms are provided NET length.
All Pemko automatic door bottoms can be trimmed down by as much as 2" (stock lengths only). If non-stock sizes are ordered, order must note need to trim
2 inches from the size ordered.
Lead line available upon request; consult Customer Service for options on profiles.
The drop-bar seal actuation mechanism (all models) causes the drop-bar seal to always actuate on the hinge side first. This feature prevents the seal from skidding along the floor / threshold while the door is being closed. Door hang up will not occur.